Remote Computer Screen (RCS) The RCS gives you total set-up and editing control with up to 65,536 colors. One RCS can power multiple machines, saving the cost of additional controllers.	LED Light The LED Light offers precise lighting for precise results.
Automatic Thread Cutter The MB-4 automatically cuts jump threads - even between letters - saving you time and hassle.	Dedicated Bobbin Winding Motor This feature - not found on professional machines - allows you to wind new bobbins even while the machine is stitching a design.
On Board Control MB-4 includes an on-board sub-control device, which allows you to use the MB-4 without the controller. The MB-4 also includes 3 MB of memory which can store up to 1,500,000 stitches or up to 100 designs.	Link Directly to PC The on-board USB slave port allows you to connect directly to your PC with Digitizer MB software, sold separately.
Embroidery Hoops Three MB-4 hoops (included) snap in and out easily and provide the embroidery areas most often used in the industry. The MB-4 is also fully compatible with industry-standard Tajima hoops.	12 Months factory Warranty 5 Years on electronic components

Features:

• Backlit LCD screen
• Auto thread cutter
• USB memory key compatible
• ATA PC card port
• Compatible with Janome software
• Embroidery speed up to 650spm
• Built-in designs: 100
• Fonts: 3
• Monogramming: 2 & 3 letter
• Expanded built-in memory
• Change colors to favorite thread: Janome, Robison-Anton, Madeira, Mettler
• Drag & Drop editing for easy placement
• Embroidery design resize 90% - 110% by 1%
• Rotate in 1 and 45 degree increments
• Flip vertically and horizontally
• Standard hoops: Large 5.5" x 7.9" (140mm x 200mm) and Standard 5" x 4.3" (126mm x 110mm)
• Embroidery area tracing
• MY SET screen controls for contrast, in/cm, designation, and other customization
• Zoom in and out
• Multi-language selection
• Stitch-out time indicator
• Stitch counter
• Upper thread and presser foot sensors
• Manual thread tension control
• Ball bearing precision

Standard Accessories:

• Lint Brush - Use it to brush away lint.
• Accessory Box
• Bobbins
• Felt Ring (large)
• Felt Ring (small)
• Hoop M1 (240 x 200)
• Hoop M2 (126 x 110)
• Hoop M3 (50 x 50)
• Hoop Supporter
• Instruction Book
• Instructional CD-ROM
• Needle (DB x K5Q1-NY)
• Needle Threader
• Offset Screwdriver
• Oiler
• Power Supply Cable
• Scissors
• Screwdriver (large)
• Screwdriver (small)
• Seam Ripper
• Setscrew
• Spool Caps
• Spool Net
• Spool Pin
• Spool Rest
• Spool Stand
• Thread Guide Bar
• Thread Guide Pole
• Tweezers

Specifications:

• Single Hear 4-Needle Embroidery Machine
• DB Rotary Hook (Full Rotary)
• Number of Needles: 4
• Type of Needles: DBxK5Q1NY #11
• Cylinder Shape of Bed
• Skeleton (Clam Shell) Body Construction
• Machine Size: W365 x H640/(440*) x D520 mm
• Bed Width: W299 x H130 mm
• Machine Weight: 20.5 kg
• Packing Size: W450 x H620 x D660 mm (*1)
• Gross Weight (incl. Packing): 29 kgs (*1)
• DC Motor
• Max. Speed: 800 spm
• Low Range Speed: Up to 400 spm
• Bobbin Winding Speed: 2,000 rpm
• Machine Control: By RCS (option) or Sub-Control Panel
• Sub-Control Panel: LCD with Back-Light (H12xW63mm)
• Mode Key (*2)
• OK Key
• 4 Jog-Keys
• Forward/Reverse Stitch Keys
• Forward/Reverse Stitch Keys
• Lay-in Thread Tension (Manual Adjustment)
• Independent Bobbin Winding (with Independent Start Button)
• Built-in Auto Thread Cutter (needle & bobbin threads)
• Upper Thread Holder Spring on the Face Plate
• Thread Cutter for Bobbin Winding
• Direct PC-Link
• Embroidery Format Compatibility: jef+/jef (Janome) & DSL (Tajima)
• Resumption Setting/My Set (with RCS)
• 3 Hoops
• White LED x 2 Sewing Lamp
• Start/Stop Key (on RCS and Sub-Control Panel)
• Manual Thread Cutting Key
• Upper thread Breakage Sensor
• Spool Stand (incl. 1 for Bobbin Thread & 4 Additional Spool)

if you reside close to the addresses listed below

feel free to call in and check the machines out.

other wise we will gladly send any machine you would like by courier or direct mail.